How Much Does Asphalt Cost in Georgia?
Asphalt averages $107.64 per ton in Georgia as of 2026 research, with metro-level pricing ranging from $99.03 (lowest-cost metro) to $113.02 (highest-cost metro). That's a -8% premium over the national midpoint of $117.00 per ton (source; confidence: high). The state midpoint is computed by applying Georgia's 0.92× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Georgia, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Asphalt Pricing in Georgia?
Georgia prices roughly 8% below the national midpoint, driven by low southern labor rates, minimal frost depth (shallow footings save concrete on every foundation), and abundant in-state aggregate and cement production. The Atlanta metro dominates the state's construction volume and runs above the state average on sustained demand pressure, while the Savannah/coastal corner carries hurricane-wind and seismic cost that the rest of the state does not.
Climate and supply factors: Minimal frost across most of the state means shallow footings and less perimeter concrete than northern states — a genuine cost advantage. Piedmont red clay (Atlanta and north Georgia) is expansive and often triggers geotechnical review on larger jobs, while the sandy Coastal Plain south of the Fall Line has low cohesion and a high water table that complicates shallow foundations. Most of Georgia sits in low Seismic Design Categories (A-B), but the Savannah/coastal corner carries elevated seismic and hurricane-wind design values (roughly 120-130 mph ASCE 7 design wind speed).
Asphalt Prices by Georgia's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Georgia state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Ton | vs. State Avg |
|---|---|---|---|
| Atlanta | 505K | $113.02 | +5% |
| Augusta | 206K | $102.26 | -5% |
| Columbus | 204K | $100.11 | -7% |
| Macon | 157K | $99.03 | -8% |
| Savannah | 148K | $107.64 | — |
When to Buy Asphalt in Georgia
Construction season in Georgia: Year-round statewide; summer pours (Jun-Aug) require hot-weather curing per ACI 305 given high heat and humidity, and Atlantic hurricane season (Jun-Nov) can disrupt Savannah/coastal deliveries. Brief cold snaps in north Georgia occasionally require cold-weather protection (ACI 306) Dec-Feb.
Hot-mix asphalt plants typically run April-November and shut down in winter; spring re-opening pricing tends to be the year's lowest while late-summer is the year's highest. For non-emergency work in Georgia, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Asphalt in Georgia
Frost line: 0-5 in (north Georgia mountains ~5 in per IRC frost map; central and coastal Georgia effectively 0 in; local footing minimum typically 12 in). Frost line drives footing and base depth on hardscape projects — though it has less direct impact on per-ton asphalt pricing.
State / local code: Georgia State Minimum Standard Codes — the International Residential Code and International Building Code (2018 I-code base carried forward with Georgia amendments through Department of Community Affairs rulemaking) adopted statewide by DCA and enforced by local building departments. Coastal counties apply higher ASCE 7 design wind speeds.
Where to Find Asphalt Suppliers in Georgia
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Georgia:
- Georgia Ready Mixed Concrete Association (GRMCA) member directory
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Asphalt for Your Project
Use our Asphalt Calculator to estimate quantity, then apply Georgia's 0.92× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 0.92 for a Georgia-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does asphalt cost per ton in Georgia?
Asphalt averages $107.64 per ton in Georgia, with a metro range of $99.03 to $113.02 as of 2026. Georgia pricing runs about -8% above the national midpoint.
What is the cheapest Georgia metro for asphalt?
Macon typically prices the lowest of the major Georgia metros, around $99.03 per ton. Atlanta typically prices the highest, around $113.02. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy asphalt in Georgia?
Year-round statewide; summer pours (Jun-Aug) require hot-weather curing per ACI 305 given high heat and humidity, and Atlantic hurricane season (Jun-Nov) can disrupt Savannah/coastal deliveries. Brief cold snaps in north Georgia occasionally require cold-weather protection (ACI 306) Dec-Feb. Hot-mix asphalt plants typically run April-November and shut down in winter; spring re-opening pricing tends to be the year's lowest while late-summer is the year's highest. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect asphalt costs in Georgia?
Georgia State Minimum Standard Codes — the International Residential Code and International Building Code (2018 I-code base carried forward with Georgia amendments through Department of Community Affairs rulemaking) adopted statewide by DCA and enforced by local building departments. Coastal counties apply higher ASCE 7 design wind speeds.
Where can I find asphalt suppliers in Georgia?
Start with the Georgia Ready Mixed Concrete Association (GRMCA) member directory, the NRMCA national producer directory filtered to Georgia, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is asphalt more expensive in Georgia than the national average?
Georgia prices roughly 8% below the national midpoint, driven by low southern labor rates, minimal frost depth (shallow footings save concrete on every foundation), and abundant in-state aggregate and cement production. The Atlanta metro dominates the state's construction volume and runs above the state average on sustained demand pressure, while the Savannah/coastal corner carries hurricane-wind and seismic cost that the rest of the state does not.
Related Pages
- All asphalt prices by state
- All construction material prices in Georgia
- Asphalt prices in Florida
- Asphalt prices in North Carolina
- Asphalt prices in Texas
- Asphalt Calculator
- Pricing methodology & sources
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc