How Much Does Concrete Cost in Oregon?
Concrete averages $184.80 per cubic yard in Oregon as of 2026 research, with metro-level pricing ranging from $184.80 (lowest-cost metro) to $203.28 (highest-cost metro). That's a 12% premium over the national midpoint of $165.00 per cubic yard (source; confidence: high). The state midpoint is computed by applying Oregon's 1.12× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Oregon, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Concrete Pricing in Oregon?
Oregon runs roughly 12% above the national midpoint — a Pacific Northwest cost profile driven by Portland-area labor rates, significant seismic detailing for Cascadia risk, and a stringent energy code, offset slightly by the complete absence of any sales tax on materials. Portland and its Washington County tech corridor (Hillsboro) run the highest, Salem and Eugene sit near the state midpoint, and rural eastern Oregon runs below it.
Climate and supply factors: The Cascadia Subduction Zone — a roughly 700-mile offshore megathrust — is the dominant hazard, with credible estimates of a large earthquake in the coming decades; Oregon's code amendments require heavy seismic detailing, especially west of the Cascades, and soft Willamette Valley alluvial soils amplify liquefaction and foundation cost. The wet marine climate west of the Cascades compresses the exterior season, while the high desert east of the range brings deeper frost and hard winters.
Concrete Prices by Oregon's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Oregon state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Cubic yard | vs. State Avg |
|---|---|---|---|
| Portland | 636K | $203.28 | +10% |
| Eugene | 180K | $184.80 | — |
| Salem | 179K | $184.80 | — |
| Gresham | 112K | $192.19 | +4% |
| Hillsboro | 108K | $199.58 | +8% |
When to Buy Concrete in Oregon
Construction season in Oregon: Roughly May-October west of the Cascades, where the wet marine winter compresses the pour and paving season and dry summers are prime; eastern Oregon is drier but has hard winter freezes.
Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work in Oregon, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Concrete in Oregon
Frost line: 12 in (Willamette Valley/Portland); 18-24 in in the high desert and Klamath region east of the Cascades; set locally, no single statewide figure. Oregon's frost line drives footings and bases below the frost depth, adding 25-50% more concrete (or aggregate base) to perimeter foundations vs. southern states with no frost requirement.
State / local code: Oregon enforces a single statewide code through the Building Codes Division — the Oregon Structural Specialty Code (OSSC) for commercial and the Oregon Residential Specialty Code (ORSC) for residential — with no local code adoption; jurisdictions administer permits but cannot write their own structural code. Oregon amends the I-codes with significant seismic provisions for Cascadia risk and runs among the more aggressive energy codes nationally.
Where to Source Ready-Mix Concrete in Oregon
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Oregon:
- Oregon Concrete & Aggregate Producers Association (OCAPA) member directory
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Concrete for Your Project
To budget accurately for your pour, calculate how many cubic yards you need, then apply Oregon's 1.12× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 1.12 for a Oregon-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does concrete cost per cubic yard in Oregon?
Concrete averages $184.80 per cubic yard in Oregon, with a metro range of $184.80 to $203.28 as of 2026. Oregon pricing runs about 12% above the national midpoint.
What is the cheapest Oregon metro for concrete?
Eugene typically prices the lowest of the major Oregon metros, around $184.80 per cubic yard. Portland typically prices the highest, around $203.28. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy concrete in Oregon?
Roughly May-October west of the Cascades, where the wet marine winter compresses the pour and paving season and dry summers are prime; eastern Oregon is drier but has hard winter freezes. Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect concrete costs in Oregon?
Oregon enforces a single statewide code through the Building Codes Division — the Oregon Structural Specialty Code (OSSC) for commercial and the Oregon Residential Specialty Code (ORSC) for residential — with no local code adoption; jurisdictions administer permits but cannot write their own structural code. Oregon amends the I-codes with significant seismic provisions for Cascadia risk and runs among the more aggressive energy codes nationally.
Where can I find concrete suppliers in Oregon?
Start with the Oregon Concrete & Aggregate Producers Association (OCAPA) member directory, the NRMCA national producer directory filtered to Oregon, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is concrete more expensive in Oregon than the national average?
Oregon runs roughly 12% above the national midpoint — a Pacific Northwest cost profile driven by Portland-area labor rates, significant seismic detailing for Cascadia risk, and a stringent energy code, offset slightly by the complete absence of any sales tax on materials. Portland and its Washington County tech corridor (Hillsboro) run the highest, Salem and Eugene sit near the state midpoint, and rural eastern Oregon runs below it.
Related Pages
- All concrete prices by state
- All construction material prices in Oregon
- Concrete prices in Washington
- Concrete prices in California
- Concrete prices in Nevada
- Concrete prices in Idaho
- Concrete prices in Hawaii
- Concrete Calculator
- Pricing methodology & sources
National-average pricing triangulated from fred.stlouisfed.org. Updated Apr 2026 · methodology
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc