How Much Does Concrete Cost in Texas?
Concrete averages $173.25 per cubic yard in Texas as of 2026 research, with metro-level pricing ranging from $173.25 (lowest-cost metro) to $190.58 (highest-cost metro). That's a 5% premium over the national midpoint of $165.00 per cubic yard (source; confidence: high). The state midpoint is computed by applying Texas's 1.05× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Texas, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Concrete Pricing in Texas?
Texas runs roughly 5% above the national midpoint despite low labor and energy costs because expansive-clay soils statewide demand thicker slabs and more rebar than standard mid-Atlantic specs, and Gulf Coast hurricane wind requirements add structural cost on coastal builds. Austin metro runs 10% over the rest of the state on housing-driven supply pressure.
Climate and supply factors: Expansive clay soils (especially DFW Blackland Prairie and Houston gumbo) drive demand for thicker slabs, post-tensioning, and pier-and-beam alternatives — adds 15-25% material vs. a stable-soil baseline. Hurricane wind requirements on the Gulf Coast push to 130-150 mph design wind speeds.
Concrete Prices by Texas's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Texas state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Cubic yard | vs. State Avg |
|---|---|---|---|
| Houston | 2.30M | $181.91 | +5% |
| Dallas | 1.30M | $181.91 | +5% |
| Austin | 974K | $190.58 | +10% |
| San Antonio | 1.50M | $173.25 | — |
| Fort Worth | 956K | $176.72 | +2% |
When to Buy Concrete in Texas
Construction season in Texas: Year-round; summer pours (Jul-Aug) require hot-weather curing per ACI 305. Hurricane season (Jun-Nov) periodically disrupts Gulf Coast deliveries.
Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work in Texas, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Concrete in Texas
Frost line: 0-12 in (Panhandle 12 in, central/east Texas 6 in, Gulf Coast effectively 0 in). Texas's minimal frost line means standard slab and base depths apply — no extra concrete or base-rock cost from frost-protection footings.
State / local code: Texas adopts the IRC/IBC at the local level (no statewide adoption); most metros use the 2018 or 2021 IRC. Houston/Galveston coastal jurisdictions add windborne-debris and 130+ mph wind requirements.
Where to Find Concrete Suppliers in Texas
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Texas:
- Texas Aggregates & Concrete Association (TACA) member directory
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Concrete for Your Project
Use our Concrete Calculator to estimate quantity, then apply Texas's 1.05× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 1.05 for a Texas-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does concrete cost per cubic yard in Texas?
Concrete averages $173.25 per cubic yard in Texas, with a metro range of $173.25 to $190.58 as of 2026. Texas pricing runs about 5% above the national midpoint.
What is the cheapest Texas metro for concrete?
San Antonio typically prices the lowest of the major Texas metros, around $173.25 per cubic yard. Austin typically prices the highest, around $190.58. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy concrete in Texas?
Year-round; summer pours (Jul-Aug) require hot-weather curing per ACI 305. Hurricane season (Jun-Nov) periodically disrupts Gulf Coast deliveries. Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect concrete costs in Texas?
Texas adopts the IRC/IBC at the local level (no statewide adoption); most metros use the 2018 or 2021 IRC. Houston/Galveston coastal jurisdictions add windborne-debris and 130+ mph wind requirements.
Where can I find concrete suppliers in Texas?
Start with the Texas Aggregates & Concrete Association (TACA) member directory, the NRMCA national producer directory filtered to Texas, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is concrete more expensive in Texas than the national average?
Texas runs roughly 5% above the national midpoint despite low labor and energy costs because expansive-clay soils statewide demand thicker slabs and more rebar than standard mid-Atlantic specs, and Gulf Coast hurricane wind requirements add structural cost on coastal builds. Austin metro runs 10% over the rest of the state on housing-driven supply pressure.
Related Pages
- All concrete prices by state
- All construction material prices in Texas
- Concrete prices in Florida
- Concrete prices in California
- Concrete Calculator
- Pricing methodology & sources
Written by Daniel McCarney — AceCalc