How Much Does Drywall Cost in Idaho?
Drywall averages $12.00 per sheet in Idaho as of 2026 research, with metro-level pricing ranging from $11.64 (lowest-cost metro) to $12.60 (highest-cost metro). That's a 0% premium over the national midpoint of $12.00 per sheet (source; confidence: high). The state midpoint is computed by applying Idaho's 1.00× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Idaho, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Drywall Pricing in Idaho?
Idaho lands right around the national midpoint for construction material costs, so statewide pricing is close to the U.S. average. Fast-growing Boise and the wider Treasure Valley put mild upward pressure on labor and delivered material prices, while rural and eastern Idaho tend to run a touch cheaper. Long haul distances to remote sites and a compressed winter building season are the biggest swing factors.
Climate and supply factors: Idaho spans high-desert valleys and cold mountain country, so elevation drives big swings in frost depth, snow load, and curing conditions. The Treasure Valley is arid, meaning summer concrete pours lose moisture fast and need attention to curing, while northern and eastern Idaho see hard winter freezes that push footings deeper. The state also carries real seismic hazard along the Intermountain Seismic Belt and central Idaho ranges: the 1983 M6.9 Borah Peak and 2020 M6.5 Central Idaho earthquakes were both felt across the region.
Drywall Prices by Idaho's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Idaho state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Sheet | vs. State Avg |
|---|---|---|---|
| Boise | 237K | $12.60 | +5% |
| Meridian | 140K | $12.48 | +4% |
| Nampa | 117K | $12.12 | +1% |
| Caldwell | 73K | $11.88 | -1% |
| Idaho Falls | 68K | $11.64 | -3% |
When to Buy Drywall in Idaho
Construction season in Idaho: April through November is the practical building window across most of Idaho, with the Treasure Valley (Boise, Meridian, Nampa) enjoying the longest usable season. At higher elevations and in the north and east, hard winter freezes and mountain snowpack shorten the season and can halt foundation and flatwork through winter. Arid summer heat also compresses concrete pours toward early mornings to manage rapid moisture loss.
Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work in Idaho, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Drywall in Idaho
Frost line: 24 in in the Treasure Valley (Boise) and Coeur d'Alene; deeper (commonly 30-36 in) in eastern Idaho and colder, higher-elevation counties. The design depth is set by the local jurisdiction under the Idaho Residential Code (Table R301.2(1)); exterior footings must sit at least 12 in below undisturbed grade and below the local frost line.. Frost line drives footing and base depth on hardscape projects — though it has less direct impact on per-sheet drywall pricing.
State / local code: Idaho enforces a mandatory statewide building code under the Idaho Building Code Act. The code is overseen by the Idaho Building Code Board within the Division of Occupational and Professional Licenses (DOPL), the successor to the former Division of Building Safety. Because new editions must be adopted by the legislature, Idaho remains on the 2018 International Building Code (IBC) and 2018 International Residential Code (IRC), with state amendments, as of 2026. Local governments administer permits and inspections; where none does, DOPL handles them.
Where to Find Drywall Suppliers in Idaho
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Idaho:
- Idaho Concrete and Aggregate Producers Association (ICAPA)
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Drywall for Your Project
Use our Drywall Calculator to estimate quantity, then apply Idaho's 1.00× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 1.00 for a Idaho-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does drywall cost per sheet in Idaho?
Drywall averages $12.00 per sheet in Idaho, with a metro range of $11.64 to $12.60 as of 2026. Idaho pricing runs about 0% above the national midpoint.
What is the cheapest Idaho metro for drywall?
Idaho Falls typically prices the lowest of the major Idaho metros, around $11.64 per sheet. Boise typically prices the highest, around $12.60. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy drywall in Idaho?
April through November is the practical building window across most of Idaho, with the Treasure Valley (Boise, Meridian, Nampa) enjoying the longest usable season. At higher elevations and in the north and east, hard winter freezes and mountain snowpack shorten the season and can halt foundation and flatwork through winter. Arid summer heat also compresses concrete pours toward early mornings to manage rapid moisture loss. Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect drywall costs in Idaho?
Idaho enforces a mandatory statewide building code under the Idaho Building Code Act. The code is overseen by the Idaho Building Code Board within the Division of Occupational and Professional Licenses (DOPL), the successor to the former Division of Building Safety. Because new editions must be adopted by the legislature, Idaho remains on the 2018 International Building Code (IBC) and 2018 International Residential Code (IRC), with state amendments, as of 2026. Local governments administer permits and inspections; where none does, DOPL handles them.
Where can I find drywall suppliers in Idaho?
Start with the Idaho Concrete and Aggregate Producers Association (ICAPA), the NRMCA national producer directory filtered to Idaho, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is drywall more expensive in Idaho than the national average?
Idaho lands right around the national midpoint for construction material costs, so statewide pricing is close to the U.S. average. Fast-growing Boise and the wider Treasure Valley put mild upward pressure on labor and delivered material prices, while rural and eastern Idaho tend to run a touch cheaper. Long haul distances to remote sites and a compressed winter building season are the biggest swing factors.
Related Pages
- All drywall prices by state
- All construction material prices in Idaho
- Drywall prices in Washington
- Drywall prices in Oregon
- Drywall prices in Nevada
- Drywall prices in Utah
- Drywall prices in Montana
- Drywall prices in Wyoming
- Drywall Calculator
- Pricing methodology & sources
National-average pricing triangulated from homeguide.com. Updated Apr 2026 · methodology
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc