How Much Does Drywall Cost in Maryland?
Drywall averages $13.44 per sheet in Maryland as of 2026 research, with metro-level pricing ranging from $12.90 (lowest-cost metro) to $15.05 (highest-cost metro). That's a 12% premium over the national midpoint of $12.00 per sheet (source; confidence: high). The state midpoint is computed by applying Maryland's 1.12× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Maryland, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Drywall Pricing in Maryland?
Maryland runs roughly 12% above the national midpoint — a wealthy, high-labor-cost state anchored by the Washington, D.C. and Baltimore metros. It sits clearly below the New York/New Jersey/Boston tier: favorable material logistics (local Piedmont quarries, port access, no local sales tax stacking on the flat 6%) hold pricing in check. The DC-suburban counties (Montgomery, Prince George's) run well above the Baltimore metro and Eastern Shore.
Climate and supply factors: The Chesapeake Bay Critical Area — all land within 1,000 ft of tidal water — imposes a minimum 100-ft buffer (up to 300 ft on steep or erodible slopes) where grading and construction require a buffer-management plan, raising cost and time on waterfront work. Freeze-thaw across the Piedmont and western Maryland drives frost footings and cold-weather concrete, while the DC-metro labor market (Montgomery and Prince George's counties) is among the region's most expensive.
Drywall Prices by Maryland's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Maryland state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Sheet | vs. State Avg |
|---|---|---|---|
| Baltimore | 569K | $13.44 | — |
| Columbia | 104K | $14.11 | +5% |
| Germantown | 91K | $15.05 | +12% |
| Frederick | 90K | $12.90 | -4% |
| Waldorf | 83K | $13.71 | +2% |
When to Buy Drywall in Maryland
Construction season in Maryland: Late March/April through November, with the sweet spot late spring through early fall; asphalt needs ambient temps above roughly 50°F, and cold-weather concrete methods extend the season into winter at added cost.
Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work in Maryland, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Drywall in Maryland
Frost line: 30 in (typical statewide, e.g. Prince George's County; Eastern Shore ~24 in, western Maryland/Appalachian deeper; set by local jurisdiction). Frost line drives footing and base depth on hardscape projects — though it has less direct impact on per-sheet drywall pricing.
State / local code: Maryland enforces the Maryland Building Performance Standards (MBPS) through the Department of Labor, requiring every jurisdiction to adopt the IBC, IRC, and IECC (state-modified) and to enforce updates within 12 months of state adoption. Local jurisdictions may amend most provisions except the energy code (IECC) and the Maryland Accessibility Code.
Where to Find Drywall Suppliers in Maryland
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Maryland:
- Maryland Ready Mix Concrete Association (MRMCA) member directory
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Drywall for Your Project
Use our Drywall Calculator to estimate quantity, then apply Maryland's 1.12× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 1.12 for a Maryland-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does drywall cost per sheet in Maryland?
Drywall averages $13.44 per sheet in Maryland, with a metro range of $12.90 to $15.05 as of 2026. Maryland pricing runs about 12% above the national midpoint.
What is the cheapest Maryland metro for drywall?
Frederick typically prices the lowest of the major Maryland metros, around $12.90 per sheet. Germantown typically prices the highest, around $15.05. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy drywall in Maryland?
Late March/April through November, with the sweet spot late spring through early fall; asphalt needs ambient temps above roughly 50°F, and cold-weather concrete methods extend the season into winter at added cost. Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect drywall costs in Maryland?
Maryland enforces the Maryland Building Performance Standards (MBPS) through the Department of Labor, requiring every jurisdiction to adopt the IBC, IRC, and IECC (state-modified) and to enforce updates within 12 months of state adoption. Local jurisdictions may amend most provisions except the energy code (IECC) and the Maryland Accessibility Code.
Where can I find drywall suppliers in Maryland?
Start with the Maryland Ready Mix Concrete Association (MRMCA) member directory, the NRMCA national producer directory filtered to Maryland, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is drywall more expensive in Maryland than the national average?
Maryland runs roughly 12% above the national midpoint — a wealthy, high-labor-cost state anchored by the Washington, D.C. and Baltimore metros. It sits clearly below the New York/New Jersey/Boston tier: favorable material logistics (local Piedmont quarries, port access, no local sales tax stacking on the flat 6%) hold pricing in check. The DC-suburban counties (Montgomery, Prince George's) run well above the Baltimore metro and Eastern Shore.
Related Pages
- All drywall prices by state
- All construction material prices in Maryland
- Drywall prices in Virginia
- Drywall prices in Pennsylvania
- Drywall prices in New Jersey
- Drywall prices in West Virginia
- Drywall prices in Delaware
- Drywall Calculator
- Pricing methodology & sources
National-average pricing triangulated from homeguide.com. Updated Apr 2026 · methodology
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc