How Much Does Drywall Cost in Wisconsin?
Drywall averages $12.00 per sheet in Wisconsin as of 2026 research, with metro-level pricing ranging from $11.88 (lowest-cost metro) to $12.60 (highest-cost metro). That's a 0% premium over the national midpoint of $12.00 per sheet (source; confidence: high). The state midpoint is computed by applying Wisconsin's 1.00× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Wisconsin, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Drywall Pricing in Wisconsin?
Wisconsin prices roughly at the national midpoint. Milwaukee and Madison carry moderate Upper-Midwest labor costs, but the state's deep 48-inch (or deeper) frost-footing requirement adds concrete and excavation to every foundation, offsetting the modest below-national material pricing seen farther south. Milwaukee runs the highest, lifted by labor, a compressed lake-effect season, and the city's 7.9% combined sales tax.
Climate and supply factors: Wisconsin's 48-inch UDC frost-depth floor (60 inches or deeper in the north) drives deeper footings and more concrete per foundation than warmer states. Severe freeze-thaw and heavy road de-icing favor air-entrained, durable concrete mixes, and winter placement needs heating and protection under ACI 306. Lake-effect cold near Lake Michigan (Milwaukee, Racine, Kenosha, Green Bay) compresses the pour season, and clay soils in the southeast affect drainage and bearing.
Drywall Prices by Wisconsin's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Wisconsin state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Sheet | vs. State Avg |
|---|---|---|---|
| Milwaukee | 567K | $12.60 | +5% |
| Madison | 278K | $12.36 | +3% |
| Green Bay | 106K | $12.00 | — |
| Kenosha | 99K | $12.00 | — |
| Racine | 78K | $11.88 | -1% |
When to Buy Drywall in Wisconsin
Construction season in Wisconsin: Mid-April through mid/late October; cold-weather concreting procedures (ACI 306) are effectively required November-March when temperatures fall below 40°F during curing, and lake-effect cold near Lake Michigan shortens the practical window.
Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work in Wisconsin, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Drywall in Wisconsin
Frost line: 48 in statewide minimum (per Uniform Dwelling Code SPS 321.16; northern counties commonly 60 in or deeper). Frost line drives footing and base depth on hardscape projects — though it has less direct impact on per-sheet drywall pricing.
State / local code: Wisconsin regulates one- and two-family dwellings under the statewide Uniform Dwelling Code (UDC, chapters SPS 320-325, based on the 2015 IRC) and commercial buildings under the Commercial Building Code (SPS 361-366, based on the 2015 IBC), both administered by the Department of Safety and Professional Services (DSPS). The technical code is uniform statewide; local building officials handle permitting and inspection.
Where to Find Drywall Suppliers in Wisconsin
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Wisconsin:
- Wisconsin Ready Mixed Concrete Association (WRMCA) member directory
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Drywall for Your Project
Use our Drywall Calculator to estimate quantity, then apply Wisconsin's 1.00× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 1.00 for a Wisconsin-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does drywall cost per sheet in Wisconsin?
Drywall averages $12.00 per sheet in Wisconsin, with a metro range of $11.88 to $12.60 as of 2026. Wisconsin pricing runs about 0% above the national midpoint.
What is the cheapest Wisconsin metro for drywall?
Racine typically prices the lowest of the major Wisconsin metros, around $11.88 per sheet. Milwaukee typically prices the highest, around $12.60. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy drywall in Wisconsin?
Mid-April through mid/late October; cold-weather concreting procedures (ACI 306) are effectively required November-March when temperatures fall below 40°F during curing, and lake-effect cold near Lake Michigan shortens the practical window. Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect drywall costs in Wisconsin?
Wisconsin regulates one- and two-family dwellings under the statewide Uniform Dwelling Code (UDC, chapters SPS 320-325, based on the 2015 IRC) and commercial buildings under the Commercial Building Code (SPS 361-366, based on the 2015 IBC), both administered by the Department of Safety and Professional Services (DSPS). The technical code is uniform statewide; local building officials handle permitting and inspection.
Where can I find drywall suppliers in Wisconsin?
Start with the Wisconsin Ready Mixed Concrete Association (WRMCA) member directory, the NRMCA national producer directory filtered to Wisconsin, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is drywall more expensive in Wisconsin than the national average?
Wisconsin prices roughly at the national midpoint. Milwaukee and Madison carry moderate Upper-Midwest labor costs, but the state's deep 48-inch (or deeper) frost-footing requirement adds concrete and excavation to every foundation, offsetting the modest below-national material pricing seen farther south. Milwaukee runs the highest, lifted by labor, a compressed lake-effect season, and the city's 7.9% combined sales tax.
Related Pages
- All drywall prices by state
- All construction material prices in Wisconsin
- Drywall prices in Illinois
- Drywall prices in Michigan
- Drywall prices in Minnesota
- Drywall prices in Iowa
- Drywall Calculator
- Pricing methodology & sources
National-average pricing triangulated from homeguide.com. Updated Apr 2026 · methodology
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc