How Much Does Pavers Cost in Minnesota?
Pavers averages $0.49 per paver in Minnesota as of 2026 research, with metro-level pricing ranging from $0.47 (lowest-cost metro) to $0.52 (highest-cost metro). That's a 3% premium over the national midpoint of $0.48 per paver (source; confidence: medium). The state midpoint is computed by applying Minnesota's 1.03× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Minnesota, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Pavers Pricing in Minnesota?
Minnesota prices roughly 3% above the national midpoint. The Twin Cities carry above-average labor costs, a stringent state energy code, and very deep 42-inch (60-inch in the north) frost footings that add structural cost — pushing the metro above the general Midwest discount, while Duluth and outstate Minnesota run at or below the state midpoint. Minneapolis and St. Paul also stack local sales taxes (9.025% and 9.875% combined).
Climate and supply factors: Very deep frost footings (42 inches in the Twin Cities, 60 inches in the north) mean more excavation and concrete per foundation than warmer states, and Minnesota's long cold season makes cold-weather concreting under ACI 306 — heating, blankets, accelerators — a routine shoulder-season cost. Heavy de-icing and freeze-thaw drive durable air-entrained mixes on exterior flatwork, and clay and organic/peat soils in parts of the metro can require over-excavation or engineered fill.
Pavers Prices by Minnesota's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Minnesota state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Paver | vs. State Avg |
|---|---|---|---|
| Minneapolis | 427K | $0.52 | +5% |
| Saint Paul | 307K | $0.52 | +5% |
| Rochester | 122K | $0.50 | +1% |
| Bloomington | 89K | $0.51 | +3% |
| Duluth | 87K | $0.47 | -4% |
When to Buy Pavers in Minnesota
Construction season in Minnesota: Late April through October, peaking May-September; cold-weather concreting (ACI 306) governs shoulder-season pours when temperatures reach or fall below 40°F, and hot-mix asphalt paving effectively ends by late October in Minnesota's long winter.
Concrete and clay paver pricing trends with the spring-through-fall hardscape season; winter promotional pricing on prior-year stock runs 10-25% off retail. For non-emergency work in Minnesota, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Pavers in Minnesota
Frost line: 42 in (Twin Cities/southern Minnesota baseline); northern counties 60 in (Duluth/International Falls frost penetration can run deeper in severe winters). Minnesota's frost line drives footings and bases below the frost depth, adding 25-50% more concrete (or aggregate base) to perimeter foundations vs. southern states with no frost requirement.
State / local code: Minnesota enforces the statewide Minnesota State Building Code through the Department of Labor and Industry, with the 2020 edition based on the 2018 IBC (commercial) and 2018 IRC (residential). Minnesota is known for a stringent energy code with additional state amendments, and adopts on roughly a six-year cycle rather than the ICC's three-year cycle.
Where to Find Pavers Suppliers in Minnesota
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Minnesota:
- Aggregate & Ready Mix Association of Minnesota (ARM of Minnesota) member directory
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Pavers for Your Project
Use our Pavers Calculator to estimate quantity, then apply Minnesota's 1.03× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 1.03 for a Minnesota-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does pavers cost per paver in Minnesota?
Pavers averages $0.49 per paver in Minnesota, with a metro range of $0.47 to $0.52 as of 2026. Minnesota pricing runs about 3% above the national midpoint.
What is the cheapest Minnesota metro for pavers?
Duluth typically prices the lowest of the major Minnesota metros, around $0.47 per paver. Minneapolis typically prices the highest, around $0.52. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy pavers in Minnesota?
Late April through October, peaking May-September; cold-weather concreting (ACI 306) governs shoulder-season pours when temperatures reach or fall below 40°F, and hot-mix asphalt paving effectively ends by late October in Minnesota's long winter. Concrete and clay paver pricing trends with the spring-through-fall hardscape season; winter promotional pricing on prior-year stock runs 10-25% off retail. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect pavers costs in Minnesota?
Minnesota enforces the statewide Minnesota State Building Code through the Department of Labor and Industry, with the 2020 edition based on the 2018 IBC (commercial) and 2018 IRC (residential). Minnesota is known for a stringent energy code with additional state amendments, and adopts on roughly a six-year cycle rather than the ICC's three-year cycle.
Where can I find pavers suppliers in Minnesota?
Start with the Aggregate & Ready Mix Association of Minnesota (ARM of Minnesota) member directory, the NRMCA national producer directory filtered to Minnesota, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is pavers more expensive in Minnesota than the national average?
Minnesota prices roughly 3% above the national midpoint. The Twin Cities carry above-average labor costs, a stringent state energy code, and very deep 42-inch (60-inch in the north) frost footings that add structural cost — pushing the metro above the general Midwest discount, while Duluth and outstate Minnesota run at or below the state midpoint. Minneapolis and St. Paul also stack local sales taxes (9.025% and 9.875% combined).
Related Pages
- All pavers prices by state
- All construction material prices in Minnesota
- Pavers prices in Wisconsin
- Pavers prices in Michigan
- Pavers prices in Iowa
- Pavers prices in South Dakota
- Pavers prices in North Dakota
- Pavers Calculator
- Pricing methodology & sources
National-average pricing triangulated from homeguide.com. Updated Apr 2026 · methodology
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc