How Much Does Concrete Cost in Massachusetts?
Concrete averages $211.20 per cubic yard in Massachusetts as of 2026 research, with metro-level pricing ranging from $190.08 (lowest-cost metro) to $228.10 (highest-cost metro). That's a 28% premium over the national midpoint of $165.00 per cubic yard (source; confidence: high). The state midpoint is computed by applying Massachusetts's 1.28× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Massachusetts, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Concrete Pricing in Massachusetts?
Massachusetts prices among the highest of any state we cover — roughly 28% above the national midpoint — driven by Greater Boston, one of the most expensive construction labor markets in the country (Boston's RSMeans city cost index runs among the top handful nationally, and RSMeans/Gordian is itself headquartered in Massachusetts). A deep 48-inch frost-footing standard, a strong-amendment state building code, and the Stretch/Specialized energy codes stack real material and specification cost onto every project. Central and western metros (Worcester, Springfield) run 10-18% under Greater Boston.
Climate and supply factors: The 48-inch statewide footing standard (vs. the 12-24 in typical in southern states) drives 40-60% more concrete on perimeter footings and adds excavation depth. Cold-weather curing per ACI 306 — heated enclosures, insulating blankets, accelerating admixtures — adds roughly $20-40/cu yd on Nov-Mar pours. Coastal salt-air exposure on Cape Cod, the South Shore, and the North Shore pushes toward corrosion-resistant reinforcement and higher-durability mixes.
Concrete Prices by Massachusetts's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Massachusetts state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Cubic yard | vs. State Avg |
|---|---|---|---|
| Boston | 666K | $228.10 | +8% |
| Worcester | 207K | $196.42 | -7% |
| Springfield | 155K | $190.08 | -10% |
| Cambridge | 119K | $228.10 | +8% |
| Lowell | 118K | $204.86 | -3% |
When to Buy Concrete in Massachusetts
Construction season in Massachusetts: April-November; cold-weather concreting (ACI 306) protection adds cost Nov-Mar. Dec-Feb pours are rare without heated enclosures, insulating blankets, and accelerator admixtures.
Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work in Massachusetts, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Concrete in Massachusetts
Frost line: 48 in (statewide standard per 780 CMR; ~40 in typical frost penetration, Berkshires/north-central hills deeper). Massachusetts's frost line drives footings and bases below the frost depth, adding 25-50% more concrete (or aggregate base) to perimeter foundations vs. southern states with no frost requirement.
State / local code: Massachusetts State Building Code (780 CMR), 9th edition — the residential volume adopts the 2015 IRC with extensive Massachusetts amendments (a strong-amendment state). Layered on top are the base energy code, the opt-in Stretch Energy Code, and the newer Specialized (net-zero) Energy Code, adopted by a large share of municipalities.
Where to Source Ready-Mix Concrete in Massachusetts
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Massachusetts:
- Massachusetts Aggregate & Asphalt Pavement Association (MAAPA) member directory
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Concrete for Your Project
To budget accurately for your pour, calculate how many cubic yards you need, then apply Massachusetts's 1.28× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 1.28 for a Massachusetts-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does concrete cost per cubic yard in Massachusetts?
Concrete averages $211.20 per cubic yard in Massachusetts, with a metro range of $190.08 to $228.10 as of 2026. Massachusetts pricing runs about 28% above the national midpoint.
What is the cheapest Massachusetts metro for concrete?
Springfield typically prices the lowest of the major Massachusetts metros, around $190.08 per cubic yard. Boston typically prices the highest, around $228.10. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy concrete in Massachusetts?
April-November; cold-weather concreting (ACI 306) protection adds cost Nov-Mar. Dec-Feb pours are rare without heated enclosures, insulating blankets, and accelerator admixtures. Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect concrete costs in Massachusetts?
Massachusetts State Building Code (780 CMR), 9th edition — the residential volume adopts the 2015 IRC with extensive Massachusetts amendments (a strong-amendment state). Layered on top are the base energy code, the opt-in Stretch Energy Code, and the newer Specialized (net-zero) Energy Code, adopted by a large share of municipalities.
Where can I find concrete suppliers in Massachusetts?
Start with the Massachusetts Aggregate & Asphalt Pavement Association (MAAPA) member directory, the NRMCA national producer directory filtered to Massachusetts, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is concrete more expensive in Massachusetts than the national average?
Massachusetts prices among the highest of any state we cover — roughly 28% above the national midpoint — driven by Greater Boston, one of the most expensive construction labor markets in the country (Boston's RSMeans city cost index runs among the top handful nationally, and RSMeans/Gordian is itself headquartered in Massachusetts). A deep 48-inch frost-footing standard, a strong-amendment state building code, and the Stretch/Specialized energy codes stack real material and specification cost onto every project. Central and western metros (Worcester, Springfield) run 10-18% under Greater Boston.
Related Pages
- All concrete prices by state
- All construction material prices in Massachusetts
- Concrete prices in New York
- Concrete prices in New Jersey
- Concrete prices in Pennsylvania
- Concrete Calculator
- Pricing methodology & sources
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc