How Much Does Concrete Cost in North Carolina?
Concrete averages $155.10 per cubic yard in North Carolina as of 2026 research, with metro-level pricing ranging from $148.90 (lowest-cost metro) to $162.86 (highest-cost metro). That's a -6% premium over the national midpoint of $165.00 per cubic yard (source; confidence: high). The state midpoint is computed by applying North Carolina's 0.94× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within North Carolina, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Concrete Pricing in North Carolina?
North Carolina prices roughly 6% below the national midpoint — below-average construction labor rates (per BLS) and a competitive field of aggregate and ready-mix producers keep materials affordable across the Piedmont. Charlotte and the Research Triangle (Raleigh-Durham) run a few points over the state average on sustained population-growth demand, while the Triad (Greensboro, Winston-Salem) runs slightly under. The real cost swing is geographic: coastal hurricane-wind requirements add structural material on the seaboard, and mountain frost depth adds footing concrete in the west.
Climate and supply factors: North Carolina spans three distinct construction climates: a low-frost coastal plain, the residual-clay Piedmont, and the higher-frost Appalachian mountains. Coastal counties (New Hanover, Brunswick, Pender, Onslow, Dare) sit in 130-150 mph design-wind zones per ASCE 7, pushing hurricane strapping, continuous load paths, and impact-rated or shuttered openings within the wind-borne-debris region. Piedmont red-clay and micaceous residual soils have moderate shrink-swell behavior that occasionally warrants thicker slabs or engineered footings, though far milder than Gulf-Coast expansive clay. Mountain frost drives footings to 18-24 in in Asheville and Boone.
Concrete Prices by North Carolina's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the North Carolina state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Cubic yard | vs. State Avg |
|---|---|---|---|
| Charlotte | 911K | $162.86 | +5% |
| Raleigh | 483K | $161.30 | +4% |
| Greensboro | 302K | $150.45 | -3% |
| Durham | 296K | $158.20 | +2% |
| Winston-Salem | 253K | $148.90 | -4% |
When to Buy Concrete in North Carolina
Construction season in North Carolina: Year-round in the Piedmont and coastal plain; April-October in the western mountains where winter frost and cold-weather concreting (ACI 306) protection add cost. Atlantic hurricane season (Jun-Nov) periodically disrupts coastal (Wilmington, Outer Banks) deliveries and drives post-storm rebuild demand.
Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work in North Carolina, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Concrete in North Carolina
Frost line: 12-24 in (coastal plain and Piedmont 12 in per NC Residential Code Table R301.2(1); western mountains — Asheville, Boone — 18-24+ in by local amendment). North Carolina's frost line drives footings and bases below the frost depth, adding 25-50% more concrete (or aggregate base) to perimeter foundations vs. southern states with no frost requirement.
State / local code: North Carolina State Building Code and North Carolina Residential Code (based on the International Codes with NC amendments), administered by the NC Office of the State Fire Marshal (OSFM). The 2024 edition took effect July 1, 2025, replacing the 2018 edition after a transition period. Wind loads reference ASCE 7; coastal counties fall in high-wind zones (130-150 mph) with wind-borne-debris opening protection required within roughly a mile of the shoreline.
Where to Source Ready-Mix Concrete in North Carolina
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across North Carolina:
- NCDOT approved concrete & aggregate producer list (Materials & Tests, updated daily)
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Concrete for Your Project
To budget accurately for your pour, calculate how many cubic yards you need, then apply North Carolina's 0.94× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 0.94 for a North Carolina-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does concrete cost per cubic yard in North Carolina?
Concrete averages $155.10 per cubic yard in North Carolina, with a metro range of $148.90 to $162.86 as of 2026. North Carolina pricing runs about -6% above the national midpoint.
What is the cheapest North Carolina metro for concrete?
Winston-Salem typically prices the lowest of the major North Carolina metros, around $148.90 per cubic yard. Charlotte typically prices the highest, around $162.86. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy concrete in North Carolina?
Year-round in the Piedmont and coastal plain; April-October in the western mountains where winter frost and cold-weather concreting (ACI 306) protection add cost. Atlantic hurricane season (Jun-Nov) periodically disrupts coastal (Wilmington, Outer Banks) deliveries and drives post-storm rebuild demand. Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect concrete costs in North Carolina?
North Carolina State Building Code and North Carolina Residential Code (based on the International Codes with NC amendments), administered by the NC Office of the State Fire Marshal (OSFM). The 2024 edition took effect July 1, 2025, replacing the 2018 edition after a transition period. Wind loads reference ASCE 7; coastal counties fall in high-wind zones (130-150 mph) with wind-borne-debris opening protection required within roughly a mile of the shoreline.
Where can I find concrete suppliers in North Carolina?
Start with the NCDOT approved concrete & aggregate producer list (Materials & Tests, updated daily), the NRMCA national producer directory filtered to North Carolina, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is concrete more expensive in North Carolina than the national average?
North Carolina prices roughly 6% below the national midpoint — below-average construction labor rates (per BLS) and a competitive field of aggregate and ready-mix producers keep materials affordable across the Piedmont. Charlotte and the Research Triangle (Raleigh-Durham) run a few points over the state average on sustained population-growth demand, while the Triad (Greensboro, Winston-Salem) runs slightly under. The real cost swing is geographic: coastal hurricane-wind requirements add structural material on the seaboard, and mountain frost depth adds footing concrete in the west.
Related Pages
- All concrete prices by state
- All construction material prices in North Carolina
- Concrete prices in Virginia
- Concrete prices in Georgia
- Concrete prices in Florida
- Concrete Calculator
- Pricing methodology & sources
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc