How Much Does Concrete Cost in South Carolina?
Concrete averages $151.80 per cubic yard in South Carolina as of 2026 research, with metro-level pricing ranging from $144.21 (lowest-cost metro) to $166.98 (highest-cost metro). That's 8% below the national midpoint of $165.00 per cubic yard (source; confidence: high). The state midpoint is computed by applying South Carolina's 0.92× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within South Carolina, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Concrete Pricing in South Carolina?
South Carolina runs roughly 8% below the national midpoint — a below-average-cost Southeast state on labor and materials, pulled back up on the coast by hurricane wind requirements and the Lowcountry's distinctive seismic detailing. Charleston and the coastal metros carry a premium from wind and seismic demands, coastal logistics, and higher local cost of living, while the upstate (Greenville-Spartanburg) and interior markets are cheaper.
Climate and supply factors: The Charleston (Middleton Place-Summerville) seismic zone gives the Lowcountry the highest earthquake risk in the Southeast — the 1886 Charleston quake drives real seismic detailing on coastal foundations, and roughly 10-15 small earthquakes are recorded in the state each year. Atlantic hurricane wind zones push coastal design speeds to 130 mph and up, and soft, saturated Coastal Plain soils (liquefaction-prone in a seismic event) contrast with firmer upstate Piedmont ground.
Concrete Prices by South Carolina's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the South Carolina state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Cubic yard | vs. State Avg |
|---|---|---|---|
| Charleston | 154K | $166.98 | +10% |
| Columbia | 140K | $151.80 | — |
| North Charleston | 120K | $159.39 | +5% |
| Mount Pleasant | 94K | $166.98 | +10% |
| Rock Hill | 75K | $144.21 | -5% |
When to Buy Concrete in South Carolina
Construction season in South Carolina: March-November, with a long mild season and roughly 10-15 workable winter weeks; summer heat and humidity (not cold) are the main constraint, favoring pours at 50-85°F.
Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work in South Carolina, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Concrete in South Carolina
Frost line: 0-6 in (coastal ~0 in, upstate Piedmont a few inches); the SC Residential Code applies a flat 12 in minimum footing depth rather than a mapped frost line. South Carolina's minimal frost line means standard slab and base depths apply — no extra concrete or base-rock cost from frost-protection footings.
State / local code: South Carolina adopts statewide codes through the SC Building Codes Council — the 2021 SC Building Code (IBC) and 2021 SC Residential Code (IRC) with state modifications, mandatory statewide since January 1, 2023. Local jurisdictions enforce and may amend only within the state framework, and coastal counties layer high-wind provisions on top.
Where to Source Ready-Mix Concrete in South Carolina
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across South Carolina:
- Carolinas Ready Mixed Concrete Association (CRMCA) member directory
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Concrete for Your Project
To budget accurately for your pour, calculate how many cubic yards you need, then apply South Carolina's 0.92× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 0.92 for a South Carolina-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does concrete cost per cubic yard in South Carolina?
Concrete averages $151.80 per cubic yard in South Carolina, with a metro range of $144.21 to $166.98 as of 2026. South Carolina pricing runs about 8% below the national midpoint.
What is the cheapest South Carolina metro for concrete?
Rock Hill typically prices the lowest of the major South Carolina metros, around $144.21 per cubic yard. Charleston typically prices the highest, around $166.98. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy concrete in South Carolina?
March-November, with a long mild season and roughly 10-15 workable winter weeks; summer heat and humidity (not cold) are the main constraint, favoring pours at 50-85°F. Ready-mix pricing peaks in May-July when residential and commercial demand stack; cold-weather pours add curing-protection cost in northern states. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect concrete costs in South Carolina?
South Carolina adopts statewide codes through the SC Building Codes Council — the 2021 SC Building Code (IBC) and 2021 SC Residential Code (IRC) with state modifications, mandatory statewide since January 1, 2023. Local jurisdictions enforce and may amend only within the state framework, and coastal counties layer high-wind provisions on top.
Where can I find concrete suppliers in South Carolina?
Start with the Carolinas Ready Mixed Concrete Association (CRMCA) member directory, the NRMCA national producer directory filtered to South Carolina, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is concrete more expensive in South Carolina than the national average?
South Carolina runs roughly 8% below the national midpoint — a below-average-cost Southeast state on labor and materials, pulled back up on the coast by hurricane wind requirements and the Lowcountry's distinctive seismic detailing. Charleston and the coastal metros carry a premium from wind and seismic demands, coastal logistics, and higher local cost of living, while the upstate (Greenville-Spartanburg) and interior markets are cheaper.
Related Pages
- All concrete prices by state
- All construction material prices in South Carolina
- Concrete prices in North Carolina
- Concrete prices in Georgia
- Concrete Calculator
- Pricing methodology & sources
National-average pricing triangulated from fred.stlouisfed.org. Updated Apr 2026 · methodology
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc