How Much Does Drywall Cost in Arkansas?
Drywall averages $10.68 per sheet in Arkansas as of 2026 research, with metro-level pricing ranging from $10.15 (lowest-cost metro) to $11.11 (highest-cost metro). That's 11% below the national midpoint of $12.00 per sheet (source; confidence: high). The state midpoint is computed by applying Arkansas's 0.89× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Arkansas, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Drywall Pricing in Arkansas?
Arkansas runs roughly 11% below the national midpoint for construction inputs, reflected in the statewide 0.89 factor. It is a low-cost Southern state with inexpensive land and labor, though costs are not uniform: the Northwest Arkansas corridor around Fayetteville, Springdale, Rogers and Bentonville is a fast-growing, higher-demand pocket that prices closer to national norms, while the Delta and rural counties sit well below.
Climate and supply factors: Several regional factors drive foundation and structural detailing in Arkansas. Expansive clay soils occur across parts of the state and shrink and swell with moisture, a well-documented cause of foundation cracking that the Arkansas Geological Survey flags directly. Northeastern Arkansas sits within the New Madrid Seismic Zone — the fault system runs south to near Marked Tree — so the Delta counties carry elevated seismic and soil-liquefaction risk that pushes footing and anchorage detailing. Statewide, Arkansas lies in tornado alley's eastern edge and sees frequent high-wind and severe-storm events, favoring stronger connections and anchoring. The Mississippi River Delta adds soft alluvial soils and flood exposure, while the Ozark and Ouachita uplands bring rocky and locally karst terrain.
Drywall Prices by Arkansas's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Arkansas state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Sheet | vs. State Avg |
|---|---|---|---|
| Little Rock | 205K | $11.00 | +3% |
| Fayetteville | 99K | $11.11 | +4% |
| Fort Smith | 90K | $10.15 | -5% |
| Springdale | 88K | $10.89 | +2% |
| Jonesboro | 80K | $10.25 | -4% |
When to Buy Drywall in Arkansas
Construction season in Arkansas: Arkansas has a long building season thanks to a mild, humid subtropical climate. Site work and concrete placement run comfortably from March through November across most of the state, with crews often working year round in the south and Delta; the main weather constraints are summer heat and humidity (which speed concrete set and call for hot-weather curing) and a spring severe-storm and tornado stretch from roughly March through May that can interrupt schedules.
Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work in Arkansas, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Drywall in Arkansas
Frost line: 12-18 in (Arkansas has no single statewide frost depth; the Arkansas Fire Prevention Code Vol. III / IRC sets a 12 in minimum exterior footing depth, and local jurisdictions such as Fayetteville specify 12 in — northern Ozark counties trend toward the deeper end). Frost line drives footing and base depth on hardscape projects — though it has less direct impact on per-sheet drywall pricing.
State / local code: Arkansas building rules are consolidated under the Arkansas Fire Prevention Code (AFPC), administered by the State Fire Marshal within the Department of Public Safety. The AFPC is a three-volume set based on the International Codes — Volume I is the Fire Code (IFC), Volume II the Building Code (IBC), and Volume III the Residential Code (IRC) — and the 2021 editions took effect January 1, 2023. The key nuance for homeowners: while the code technically applies statewide, Arkansas does not compel local enforcement of the residential code for private one- and two-family dwellings, so permitting and inspections for houses are driven by city and county building departments. Many rural and unincorporated areas have little or no residential code enforcement, and where local codes exist they must use the AFPC as the baseline and may only make it more restrictive.
Where to Find Drywall Suppliers in Arkansas
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Arkansas:
- Arkansas Ready Mixed Concrete Association (ARMCA)
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Drywall for Your Project
Use our Drywall Calculator to estimate quantity, then apply Arkansas's 0.89× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 0.89 for a Arkansas-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does drywall cost per sheet in Arkansas?
Drywall averages $10.68 per sheet in Arkansas, with a metro range of $10.15 to $11.11 as of 2026. Arkansas pricing runs about 11% below the national midpoint.
What is the cheapest Arkansas metro for drywall?
Fort Smith typically prices the lowest of the major Arkansas metros, around $10.15 per sheet. Fayetteville typically prices the highest, around $11.11. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy drywall in Arkansas?
Arkansas has a long building season thanks to a mild, humid subtropical climate. Site work and concrete placement run comfortably from March through November across most of the state, with crews often working year round in the south and Delta; the main weather constraints are summer heat and humidity (which speed concrete set and call for hot-weather curing) and a spring severe-storm and tornado stretch from roughly March through May that can interrupt schedules. Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect drywall costs in Arkansas?
Arkansas building rules are consolidated under the Arkansas Fire Prevention Code (AFPC), administered by the State Fire Marshal within the Department of Public Safety. The AFPC is a three-volume set based on the International Codes — Volume I is the Fire Code (IFC), Volume II the Building Code (IBC), and Volume III the Residential Code (IRC) — and the 2021 editions took effect January 1, 2023. The key nuance for homeowners: while the code technically applies statewide, Arkansas does not compel local enforcement of the residential code for private one- and two-family dwellings, so permitting and inspections for houses are driven by city and county building departments. Many rural and unincorporated areas have little or no residential code enforcement, and where local codes exist they must use the AFPC as the baseline and may only make it more restrictive.
Where can I find drywall suppliers in Arkansas?
Start with the Arkansas Ready Mixed Concrete Association (ARMCA), the NRMCA national producer directory filtered to Arkansas, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is drywall more expensive in Arkansas than the national average?
Arkansas runs roughly 11% below the national midpoint for construction inputs, reflected in the statewide 0.89 factor. It is a low-cost Southern state with inexpensive land and labor, though costs are not uniform: the Northwest Arkansas corridor around Fayetteville, Springdale, Rogers and Bentonville is a fast-growing, higher-demand pocket that prices closer to national norms, while the Delta and rural counties sit well below.
Related Pages
- All drywall prices by state
- All construction material prices in Arkansas
- Drywall prices in Missouri
- Drywall prices in Tennessee
- Drywall prices in Mississippi
- Drywall prices in Louisiana
- Drywall prices in Texas
- Drywall prices in Oklahoma
- Drywall Calculator
- Pricing methodology & sources
National-average pricing triangulated from homeguide.com. Updated Apr 2026 · methodology
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc