How Much Does Drywall Cost in Missouri?
Drywall averages $11.40 per sheet in Missouri as of 2026 research, with metro-level pricing ranging from $10.60 (lowest-cost metro) to $11.63 (highest-cost metro). That's 5% below the national midpoint of $12.00 per sheet (source; confidence: high). The state midpoint is computed by applying Missouri's 0.95× regional adjustment to the national-average dataset documented on our pricing methodology page.
Use the metro table below for finer-grained budgeting — within Missouri, the spread between the cheapest and most expensive metro on the same material can run 15-30%.
What Drives Drywall Pricing in Missouri?
Missouri runs roughly 5% below the national midpoint. Kansas City and St. Louis price near the national average on labor and materials, but the state's large share of mid-size and rural markets pulls the statewide figure down. Localized cost drivers are regulatory in the southeast — New Madrid seismic detailing in the Bootheel — and geologic in the south (Ozark karst).
Climate and supply factors: Southeast Missouri's Bootheel lies in the New Madrid Seismic Zone; under Missouri statute (RSMo 319.200) jurisdictions expected to see strong shaking must adopt seismic design standards, adding rebar, anchorage, and connection cost on affected construction. Karst and limestone geology across the Ozarks (sinkholes, caves, variable bedrock) can raise foundation and excavation cost in southern Missouri, and freeze-thaw statewide drives frost-depth footings and air-entrained concrete.
Drywall Prices by Missouri's Major Metros
Per-metro estimates apply each metro's population-weighted price tier to the Missouri state midpoint. Population figures are 2024 ACS estimates from the U.S. Census Bureau.
| Metro | Population | Per Sheet | vs. State Avg |
|---|---|---|---|
| Kansas City | 511K | $11.63 | +2% |
| St. Louis | 289K | $11.63 | +2% |
| Springfield | 170K | $10.60 | -7% |
| Columbia | 129K | $10.94 | -4% |
| Independence | 122K | $11.40 | — |
When to Buy Drywall in Missouri
Construction season in Missouri: April through November, with spring (late April-May) and fall (September-November) the sweet spots; summer pours need hot-weather concrete practices and cold-weather placement is generally avoided December-February.
Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work in Missouri, ordering during the off-peak window typically saves 5-15% vs. spring/summer peak pricing. Material yards run promotional pricing twice a year — early-spring (Mar-Apr) on bagged products and late-fall (Oct-Nov) on bulk aggregates as plants clear inventory before shutdown.
Climate & Code Considerations for Drywall in Missouri
Frost line: 18-36 in (Kansas City ~36 in, St. Louis ~30 in, southern Missouri 18-24 in; set by local jurisdiction). Frost line drives footing and base depth on hardscape projects — though it has less direct impact on per-sheet drywall pricing.
State / local code: Missouri has no statewide building code — it is a home-rule state where adoption and enforcement are entirely local. Kansas City and St. Louis each adopt current I-Codes (reported at the 2021 IBC/IRC) with local amendments, while many rural counties have little or no code enforcement. Always confirm the adopted code with the specific jurisdiction.
Where to Find Drywall Suppliers in Missouri
Authoritative directories for sourcing ready-mix producers, aggregate quarries, and bagged-product retailers across Missouri:
- Missouri Concrete Association
- NRMCA ready-mix producer directory (filter by state)
- Quikrete dealer locator
Get quotes from at least three local suppliers — pricing on the same spec varies 10-20% across producers in the same metro. Volume orders (10+ cu yd ready-mix, 20+ tons aggregate, full pallets bagged) typically earn another 5-10% off published quotes.
Calculate Drywall for Your Project
Use our Drywall Calculator to estimate quantity, then apply Missouri's 0.95× adjustment to the national-average cost displayed on the calculator. The calculator's built-in cost overlay uses national pricing — multiply the displayed total by 0.95 for a Missouri-specific estimate, or use the per-metro figures in the table above for tighter budgeting.
Frequently Asked Questions
How much does drywall cost per sheet in Missouri?
Drywall averages $11.40 per sheet in Missouri, with a metro range of $10.60 to $11.63 as of 2026. Missouri pricing runs about 5% below the national midpoint.
What is the cheapest Missouri metro for drywall?
Springfield typically prices the lowest of the major Missouri metros, around $10.60 per sheet. Kansas City typically prices the highest, around $11.63. Differences come from delivery distance to producer plants and metro-area labor rates.
When is the best time of year to buy drywall in Missouri?
April through November, with spring (late April-May) and fall (September-November) the sweet spots; summer pours need hot-weather concrete practices and cold-weather placement is generally avoided December-February. Drywall pricing is largely seasonal-flat indoors but tightens during peak residential-construction season (May-September) when commercial drywall demand also peaks. For non-emergency work, ordering off-peak (late fall in cold-winter states, mid-winter in southern states) typically saves 5-15% vs. spring/summer peak pricing.
What code requirements affect drywall costs in Missouri?
Missouri has no statewide building code — it is a home-rule state where adoption and enforcement are entirely local. Kansas City and St. Louis each adopt current I-Codes (reported at the 2021 IBC/IRC) with local amendments, while many rural counties have little or no code enforcement. Always confirm the adopted code with the specific jurisdiction.
Where can I find drywall suppliers in Missouri?
Start with the Missouri Concrete Association, the NRMCA national producer directory filtered to Missouri, or the Quikrete dealer locator for bagged products. Get quotes from at least three local suppliers — pricing varies 10-20% across producers in the same metro.
Why is drywall more expensive in Missouri than the national average?
Missouri runs roughly 5% below the national midpoint. Kansas City and St. Louis price near the national average on labor and materials, but the state's large share of mid-size and rural markets pulls the statewide figure down. Localized cost drivers are regulatory in the southeast — New Madrid seismic detailing in the Bootheel — and geologic in the south (Ozark karst).
Related Pages
- All drywall prices by state
- All construction material prices in Missouri
- Drywall prices in Illinois
- Drywall prices in Tennessee
- Drywall prices in Oklahoma
- Drywall prices in Iowa
- Drywall prices in Arkansas
- Drywall prices in Kansas
- Drywall prices in Nebraska
- Drywall Calculator
- Pricing methodology & sources
National-average pricing triangulated from homeguide.com. Updated Apr 2026 · methodology
Estimates only. Always verify with your supplier before ordering.
Written by Daniel McCarney — AceCalc